SwitchGlo Operation

Power on your craft and radio. Flip your assigned SwitchGlo transmitter switch to ignite glow plug. When you hear the audible alert, your glow plug is glowing. SwitchGlo can be switched ON/OFF at will. If you forget to flip the switch back, SwitchGlo has a built in safeguard to automatically shut off in ten seconds. You can then re-ignite the glow plug by re-cycling your switch.
If you flip ON and do not hear the audible alert, your glow plug is spent.
Engine choking? Flip transmitter switch ON to recover optimum idle.
Craft lost? Flip transmitter switch to activate the audible alert and find your craft.

I nstallation instruction:

1. Locate a place on craft to fasten SwitchGlo.
2. Dedicate an unused channel on your receiver and plug in the SwitchGlo receiver cable.
3. Assign a switch on your transmitter to the same SwitchGlo receiver channel.
4. Install the SwitchGlo's ground cable (black) to the engine ground preferably back plate (do not attached to carbon frame)
5. Install the SwitchGlo's glow plug cable (red) to the glow plug.
6. Open up your radio's ATV settings as wide as possible to prevent SwitchGlo from triggering prematurely.

Once SwitchGlo is installed securely in the craft, it is maintenance free.  No need to re-charge separate batteries as SwitchGlo runs on for main on-board battery. Now you are ready to GLOW!

http://www.youtube.com/watch?v=PeOR-NZRk-U&eurl=http://www.switchglo.com/index.html

$230.00Rm